1,25-Dihydroxyvitamin D3 (Calcitriol) Antibody Pair abx370872|產品目錄|代理商|上海91麻豆福利视频网生物科技有限公司

所在位置: 首頁> 產品目錄> A類> abbexa>

查看大圖

產品名稱：1,25-Dihydroxyvitamin D3 (Calcitriol) Antibody Pair
產品型號：abx370872
產品廠商：abbexa
產品文檔：

你添加了1件商品查看購物車

簡單介紹：

1,25-Dihydroxyvitamin D3 (Calcitriol) Antibody Pair

詳情介紹：

Calcitriol Antibody Pair for use in Competitive ELISA assay development. This antibody pair contains:

Component	5 × 96 tests	10 × 96 tests
Capture Antibody	200 µg	400 µg
Biotin-Conjugated Competitor	50 µg	100 µg
Standard	2 µg	10 µg

Please note that quantities and concentrations may change between different batches.

It is recommended to use this antibody pair with abx098959 Antibody Pair Support Kit (Competitive Method).

Target	1,25-Dihydroxyvitamin D3 (Calcitriol)
Reactivity	General (All species)
Tested Applications	ELISA
Recommended dilutions	Dilute the Capture Antibody 125-fold with Coating Buffer. Dilute the Biotin-Conjugated Competitor 200-fold with Biotin-Conjugated Competitor Diluent. Optimal dilutions/concentrations should be determined by the end user.
Form	Liquid (Capture Antibody and Biotin-Conjugated Competitor)
Reconstitution	Reconstitute the standard with Standard Diluent. The volume, and therefore standard concentration, should be determined by the end user.
Storage	Aliquot and store at -20°C. Avoid repeated freeze/thaw cycles.
Buffer	The Capture Antibody and Biotin-Conjugated Competitor both contain 0.1% sodium azide.
Test Range	123.5 pg/ml - 10000 pg/ml
Standard Form	Lyophilized
Assay Type	Competitive
Capture Antibody Host	Rabbit
Capture Antibody Clonality	Polyclonal
Capture Antibody Conjugation	Unconjugated
Detection Antibody Conjugation	Biotin
Concentration	Capture Antibody: 0.5 mg/ml Biotin-Conjugated Competitor: 0.2 mg/ml
Availability	Shipped within 5-20 working days.
Note	This product is for research use only.
Directions for use	Bring all components to room temperature (18-25°C) and briefly spin or centrifuge the vials before use. Working solutions should be prepared and used immediately. Recommended Procedure: Dilute the Capture Antibody to working concentration using Coating Buffer. Immediately coat the 96-well plate with diluted Capture Antibody (100 µl per well). Seal the plate and incubate at 4 °C overnight or at 37 °C for 2 hours Aspirate the wells and wash with Wash Buffer (350 µl per well) and allow to soak for 1-2 min. Remove the liquid by inverting and tapping the plate on to absorbent paper. Block the plate with Blocking Buffer (200 µl per well) at 37 °C for 1.5 hours. Repeat the aspiration/wash process in Step 2. Add 50 µl of standards or sample into the appropriate wells, followed by 50 µl of working Biotin-Conjugated Competitor. Cover with a plate sealer and incubate at 37 °C for 1 hour. Repeat the aspiration/wash process in Step 2. Add appropriately diluted Streptavidin HRP (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 30 min. Repeat the aspiration/wash process in Step 2, for a total of 5 times. Add Substrate Solution (90 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 10-20 min. Keep the plate in the dark and avoid exposure to light. Add Stop Solution (50 µl per well). Tap the side of the plate to ensure thorough mixing. Measure the absorbance immediately using a microplate reader set at 450 nm.

Research Articles on 1,25-Dihydroxyvitamin D3 (Calcitriol)

姓名：

電話：

您的需求：

產品名稱：1,25-Dihydroxyvitamin D3 (Calcitriol) Antibody Pair